Find Body Armor, Military Wear, Tactical Headwear on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
ebola protective gas mask
Home > Products > Gas Mask > ebola protective gas mask

ebola protective gas mask

ebola protective gas mask

    Packaging: 20piece/box(carton box)
    Brand: XINHUA
    Place of Origin: Shanxi, China (Mainland)

Basic Info

Model No.: MF27

Product Description

 

 

1. Product Information

 

MF27ebola protective Gas Mask a kind of monocular vision filtering protective device, which can protect the personal respiratory organs. It can protect the user’s face, eyes and respiratory tract from the gas effective. It always used for the military operations, counter-terrorism and emergency response operations at public places.

 

2.MF27type chemical gas mask

Specifications:

 2.1 Leakage coefficient: ≤0.005 %( 30L/min)

2.2 Exhalation resistance: ≤100Pa (30L/min)

2.3 Field of vision: Total≥75 %

                Binocular≥55 %

                Below≥35°

2.4 Light transmittance: ≥85 %

2.5 Life time: according to the property of the cartridge chose.

         The property of the cartridge

NO.

COLOR

AGAINST OBJECTS

TEST AGENT

LIFE TIME(min)

3

Brown

Organic gases

C6H6

≥45

4

Grey

NH3,H2S

NH3

≥25

7

Yellow

Acid gases

SO2

≥30

 

 

 4.Usage maintenance and maintain

4.1.The selection of gas mask

 (1)checking the position between glasses and eyes, if the position of our eyes is 10mm higher than the horizontal center line, that proves the size is correct. And if it is higher than this, that means the size is small, and on the contrary that indicate the size is big.

(2)Pressing the connector of the canister tightly, and taking a breath, if the mask clings face without any air leakage that means a right selection.

 4.2.The procedure of wearing gas mask

 (1)   adjusting the position of fillets

 (2)   opening them and putting the mask on and then tightening the fillets to finish wearing Attention:

 (3) fillets can not be curl or be pressed inside the mask

 (4)  the stretching forces on each fillet should be equal

 (5) screwing the canister tightly up the connector in order to prevent air leakage

 (6)  considering both comfortable and air tightness while tightening the fillets

 (7)  after a long time wearing, there would have accumulation of sweat, especially in summer days, on this occasion, bowing down and taking a deep breath, the sweat would release form the exhaust clack.

 4.3.Pick gas mask off

Grasping the phone and lifting it up ahead to pick the gas mask off bottom-up.

 4.4The maintenance and storage of gas mask

(1)     wiping the sweat and dirty things on both side of the mask after using keeping the glasses and exhale vale clean especially

(2)     in case of having dirty on the exhaust clack, opening the voice meter and pick out the combination of exhaust clack and phone film to make a clean, and then setting them up as original, tightening the cover

(3)     stalling the mask in a shady dry place with supporter inside, the same time keeping them away from the organic solvent such as gasoline etc, in order to prevent the distortion of mask

(4)     taking the canister off when it would not be used for a long time, and putting the cover, because the canister would low the capacity of adsorption under a wet condition.

(5)     in case of water penetration into the canister, replacing a new one at once.

 

 

 

 

 

 

Ningxia Tianfu Activated Carbon Co.,Ltd is a non-state-run enterprise that together with engineer designing,constructing and procucing Pingluo Active Carbon Producing Factory and a building company ara the secondary companies,there and 5 active stoves,5 carbon producing lines,and the new products of active carbon reach 8000 to 10000 ton per year.

The company has a central laboratory, activated carbon plant, furnace construction company, and commerce company. With an annual output of 3,500 tons of activated carbon, our company has expanded the production line of activated carbon deep processing with the development of the market. The production line integrates crushing, sieving, pickling, dipping and drying processes to produce special-purpose activated carbon such as carrier carbon. The product is made of Ningxia "king of coal" - Taixi anthracite as the main raw material, activated by high temperature steam, and has the characteristics of developed pores, large specific surface area, good adsorption performance, high mechanical strength and long service life. One of China's premium activated carbon. The product has high benzene charcoal (benzene adsorption rate up to 64%), low ash activated carbon, high bulk specific gravity activated carbon, light bulk specific gravity activated carbon, KOH injection carbon, high adsorption activated carbon (upper carbon tetrachloride adsorption rate up to 100%), etc. Several series of dozens of varieties. Among them, automobile carbon is the first product in China. The product has good effect and the price is lower than that of domestic similar products. It is widely praised by automobile manufacturers. The company's central laboratory can test the physical and chemical performance indicators of the products according to GB requirements, JIS standards and ASTM standards according to customer requirements. In production, the laboratory tracks and monitors the products of each shift, and the products before leaving the factory. Conduct comprehensive testing and control of quality indicators. Ningxiatianfu Activated Carbon Co., Ltd.'s business purpose is: "integrity, quality, innovation"

Company Info
  • Company Name: NINGXIA TIANFU ACTIVATED CARBON CO.,LTD
  • Representative: Zhang Lianyuan
  • Product/Service: Activated Carbon , Water Purification Activated Carbon , Various Shape Activated Carbon , Granular Carbon , Powdered Carbon , Coal-Based Activated Carbon
  • Capital (Million US $): 7000,000RMB
  • Year Established: 2003
  • OEM Services Provided: no
  • Contact Person: Mr. wangfengyin
  • Tel: 86-0952-6693250